Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen in iPhone 7 Plus LCD and Digitizer Replacement introductie

Bewerking door Jeff Suovanen

Bewerking goedgekeurd door Jeff Suovanen

Voor
Na
Ongewijzigd
Apparaat
[ ]iPhone 7 Plus
Type
[ ]replacement
Thing
[ ]LCD Screen and Digitizer
Title
[ ]iPhone 7 Plus LCD Screen and Digitizer Replacement
Introduction
Use this guide to replace a cracked or broken screen in an iPhone 7 Plus. This includes removing the front-facing camera and sensor assembly, earpiece speaker, display EMI shield, and home/Touch ID sensor assembly—all of which must be transferred to your new display. For an easier repair, replace the entire display assembly instead by following [https://www.ifixit.com/Guide/iPhone+7+Plus+Display+Assembly+Replacement/67563|this much shorter guide]. [ … ] In either case, it's important to carefully transfer the original home/Touch ID sensor onto the new display in order for it to function.
Time Required Min
Geen schatting
Time Required Max
Geen schatting
Imageid
Voor
Na
Difficulty
Moderate
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
Public
Nee
Summary
[ ]Replace just the bare front panel—not including the home/Touch ID sensor, front-facing camera and sensor cable, or earpiece speaker—in an iPhone 7 Plus.

Handleidingsbenodigdheden

Gereedschap

  • P2 Pentalobe Screwdriver iPhone x1 added.
  • iOpener x1 added.
  • Suction Handle x1 added.
  • iFixit Opening Picks set of 6 x1 added.
  • Spudger x1 added.
  • Tri-point Y000 Screwdriver Bit x1 added.
  • Tweezers x1 added.
  • Phillips #000 Screwdriver x1 added.
  • iFixit Opening Tools x1 added.

Markeringen

  • In Progress added.

Stappen

Step #: 1
Voor
Na
Step #: 2
Voor
Na
Step #: 3
Voor
Na
Step #: 4
Voor
Na
Step #: 5
Voor
Na
Step #: 6
Voor
Na