Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen in Acer Aspire 5742 Motherboard Replacement introductie

Bewerking door Philip Le Riche

Bewerking goedgekeurd door Philip Le Riche

Voor
Na
Ongewijzigd
Introduction
device. After doing this you must put on [ ] Use of an anti-static wrist wrap, this wrap is in order to prevent damage highly recommended. Take care not to use too much force especially for the device and its components. While going through the task of replacing your motherboard make sure you are very careful with the zero insertion force you use and pulling ribbon cables. [ ] When lifting out parts that are still connected. When removing the keyboard, be careful with the clips they will break if you are not. After prying the keyboard up do and motherboard, take care not completely lift it because the retention mechanism is still connected. Along with this, pressing too hard while dealing with the retention mechanism will lead to snapping the mechanism. The last thing to remember is just like the keyboard, you do not want strain ribbons or cables still connected to fully remove the motherboard. There is a cable on the underside and it can get damaged. If underside. [ ] If you have any further questions you may comment and we will respond as quickly as possible!
device. After doing this you must put on [ ] Use of an anti-static wrist wrap, this wrap is in order to prevent damage highly recommended. Take care not to use too much force especially for the device and its components. While going through the task of replacing your motherboard make sure you are very careful with the zero insertion force you use and pulling ribbon cables. [ ] When lifting out parts that are still connected. When removing the keyboard, be careful with the clips they will break if you are not. After prying the keyboard up do and motherboard, take care not completely lift it because the retention mechanism is still connected. Along with this, pressing too hard while dealing with the retention mechanism will lead to snapping the mechanism. The last thing to remember is just like the keyboard, you do not want strain ribbons or cables still connected to fully remove the motherboard. There is a cable on the underside and it can get damaged. If underside. [ ] If you have any further questions you may comment and we will respond as quickly as possible!

Markeringen

  • Slice and Dice removed.