Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen in Reflowing Xbox 360 Motherboard introductie

Bewerking door Andrew Bookholt

Wachtend op goedkeuring

Voor
Na
Ongewijzigd
Apparaat
[ ]Xbox 360
Type
[ ]technique
Thing
[ ]Motherboard Reflow
Title
[ ]Reflowing Xbox 360 Motherboard
Introduction
[ ]Use this guide to reflow the solder on the chips that usually cause the Xbox 360 to have a Red Ring of Death (RROD) failure.
Time Required Min
Geen schatting
Time Required Max
Geen schatting
Difficulty
Moderate
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
Public
Nee
Summary
[ ]Reflow the solder on your Xbox 360's motherboard.

Handleidingsbenodigdheden

Gereedschap

  • Heat Gun x1 added.
  • Metal Spudger Set x1 added.
  • Flathead 3/32" or 2.5 mm Screwdriver x1 added.
  • Spudger x1 added.
  • T10 Torx Screwdriver x1 added.
  • T8 Torx Screwdriver x1 added.
  • Xbox 360 Opening Tool x1 added.

Markeringen

  • In Progress added.