Ga door naar hoofdinhoud

Wijzigingen in Adding a Remote Page Turning Switch to the Kindle 3 introductie

Bewerken voor Brian

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd
Apparaat
[ ]Kindle 3
Type
[ ]installation
Thing
[ ]Remote Page Turn Switch
Title
[ ]Installing Kindle 3 Remote Page Turn Switch
Introduction
[ ]This guide will show you how to add a small pendent type switch to your Kindle 3 so that you can turn the pages without having to hold the device. It should be helpful to someone who is disabled or anyone wanting to read in bed while keeping their hands warm under the covers.
Time Required Min
1 uur
Time Required Max
1 uur
Difficulty
Difficult
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
Public
Nee
Summary
[ ]How to add a remote (wired) page turning switch to the Kindle 3.

Gereedschap

  • JIS #00 Screwdriver x1 added.
  • Metal Spudger x1 added.
  • Soldering Iron x1 added.

Onderdelen

  • Kapton Tape x1 added.
  • Copper tape x1 added.
  • Fine Guage Wire x1 added.
  • Hand Held Enclosure x1 added.
  • 3' Stereo Cable x1 added.
  • heatshrink tubing x1 added.
  • Hot Glue Gun x1 added.
  • Small Piece of PCB x1 added.

Markeringen

  • In Progress added.
  • Member-Contributed Guide added.