Ga door naar hoofdinhoud

Wijzigingen in Fixing Playstation 3 Green Light of Death (GLOD) introductie

Bewerking door Tim Gelvin

Wachtend op goedkeuring

Voor
Na
Ongewijzigd
Apparaat
PlayStation 3
Type
repair
Thing
Green Light of Death (GLOD)
Title
Repairing PlayStation 3 Green Light of Death (GLOD)
Introduction
Put the PS3 into standby mode (red power LED) now when the PS3 is in standby hold the power button on the front of the PS3 down for until you hear it beep about 2 or 3 times then release the power button. This will reset the video settings to the lowest settings and when you start the PS3 with an HDMI or the PS3 AV cable connected it will go through setting it up.
Time Required Min
Geen schatting
Time Required Max
Geen schatting
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Public
Nee
Summary
Turn on PS3 and green light comes on but you have nothing on the TV screen.

Markeringen

  • In Progress added.
  • Member-Contributed Guide added.