Ga door naar hoofdinhoud

Wijzigingen in Fixing Playstation 3 Green Light of Death (GLOD) introductie

Bewerking door Tim Gelvin

Wachtend op goedkeuring

Voor
Na
Ongewijzigd
Introduction
Put the PS3 into standby mode (red power LED) now when the PS3 is in standby hold the power button on the front of the PS3 down for until you hear it beep about 2 or 3 times then release the power button. This will reset the video settings to the lowest settings and when you start the PS3 with an HDMI or the PS3 AV cable connected it will go through setting it up.
This guide will show you how to reset the GLOD.
Public
Nee
Ja
Summary
Turn on PS3 and green light comes on but you have nothing on the TV screen. Follow this guide to reset the GLOD.