Ga door naar hoofdinhoud

Wijzigingen in Retina MacBook 2015 USB-C Port Replacement introductie

Bewerking door Jeff Suovanen

Bewerking goedgekeurd door Jeff Suovanen

Voor
Na
Ongewijzigd
Introduction
Use this guide to replace the USB-C port on your Retina MacBook 2015.
'''To avoid logic board damage''', when your MacBook repair is complete ''but before powering it on'', [https://www.ifixit.com/Guide/Applying+Low+Voltage+After+Every+Repair+%28Retina+MacBook+2015+Only%29/107711|connect it to low-voltage power] using a 5-Watt iPhone charger and a USB-C to USB-A cable. These accessories are not included with your MacBook, so make sure you have them ready before you begin.
Conclusion
To reassemble your device, follow these instructions in reverse order. To avoid logic board damage, when your MacBook repair is complete ''but before powering it on'', [https://www.ifixit.com/Guide/Applying+Low+Voltage+After+Every+Repair+%28Retina+MacBook+2015+Only%29/107711|connect it to low-voltage power] using a 5-Watt iPhone charger and a USB-C to USB-A cable.

Onderdelen

  • USB-C to USB-A Cable x1 added.
  • USB Power Adapter for iPhone and iPod x1 added.