Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen in Jawbone Big Jambox Button Circuit Board Replacement introductie

Bewerking door Zoe Houghton

Bewerking goedgekeurd door Zoe Houghton

Voor
Na
Ongewijzigd
Apparaat
[ … ]Jawbone Big Jambox
Type
[ … ]replacement
Thing
[ … ]Button Circuit Board
Title
[ … ]Jawbone Big Jambox Button Circuit Board Replacement
Introduction
[ … ]If resetting your Big Jambox does not work, these are the instructions on how to replace the button circuit board. This is a longer process because you will need to also remove the speakers.
Time Required Min
20 minuten
Time Required Max
30 minuten
Difficulty
Moderate
Conclusion
[ … ]To reassemble your device, follow these instructions in reverse order.
Author
Public
Nee
Summary
[ … ]Replace your sticky or non-responsive buttons to be able to control your Big Jambox again.

Handleidingsbenodigdheden

Gereedschap

  • Cross Screw-Driver, Torx-Screw-Driver TX10 x1 added.
  • Drill (hand drill or powered drill) with 1.5mm~2mm (1/16"~5/64") Twist drill bit x1 added.
  • Phillips #0 Screwdriver x1 added.
  • Utility Scissors x1 added.

Markeringen

  • In Progress added.
  • Student In Progress added.

Stappen

Step #: 1
Voor
Na
Step #: 2
Voor
Na
Step #: 3
Voor
Na
Step #: 4
Voor
Na