Ga door naar hoofdinhoud

Wijzigingen in Adjusting the Rear Derailleur introductie

Bewerking door aaron thielk

Wachtend op goedkeuring

Voor
Na
Ongewijzigd
Type
repair
installation
Thing
Rear shifter/Derailleur installation and Adjustment
Title
RepairingInstalling Specialized Expedition Rear shifter/Derailleur installation and Adjustment
Introduction
'''What’s a Derailleur?'''
The derailleur is your bike’s gear shifting device. When you adjust the shifter on your handlebars, the derailleur pushes your bike chain to the next gear over, and then adjusts the tension on the chain to accommodate the change in gear size.
The derailleur is controlled by the shifter through the cable that connects the two. When the cable is loosened, the derailleur moves outwarddownward towards the smaller gears. As it does this it also tightens the bike chain, to pick up the slack created from going from a larger to smaller gear. Conversely, when the cable is tightened, the derailleur moves inward towards the larger gears, and loosens the bike chain, giving slack to compensate for the increased tension that is created from going from a smaller to a larger gear.
Conclusion
To reassemble your device, follow these instructions in reverse order.
for adjustment in the future it is likely that you will only need to adjust the barrel adjuster screw for fine adjustment.
Summary
In this guide you will learn how to install and adjust your rear derailleur so that your gears shift properly through the full range of gear ratios, and your bike chain maintains proper tension.

Stappen

Step #: 1
Voor
Na
Step #: 2
Voor
Na
Step #: 3
Voor
Na
Step #: 4
Voor
Na