Ga door naar hoofdinhoud

Wijzigingen in MacBook Air 13" Early 2014 Solid-State Drive Replacement introductie

Bewerking door Matt Fallin

Bewerking geweigerd door Adam O'Camb

Voor
Na
Ongewijzigd
Apparaat
MacBook Air 1311" Early 2014
Introduction
Use this guide to upgrade or replace the solid-state drive in a MacBook Air 13” Early 2014. This MacBook Air uses a [link|https://d3nevzfk7ii3be.cloudfront.net/igi/bFrC6XL24AOncJtG.full|proprietary storage drive connector], and is therefore '''not compatible''' with common M.2 drives without the use of an adapter.
'''Before you perform this repair''', if at all possible, [guide|119046|back up your existing SSD|new_window=true]. Then, either familiarize yourself with [guide|119499|internet recovery|new_window=true] or [guide|66371|create a bootable external drive|new_window=true] so you’ll be ready to install macOS onto your new drive and migrate your data to the new SSD.
Finally, we strongly recommend installing macOS 10.13 High Sierra (or a later macOS) before replacing the original SSD from your MacBook Air. Most new SSDs require updated storage drivers not found in versions of macOS prior to High Sierra.