Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen in iMac Intel 27" EMC 2639 Blade SSD Replacement introductie

Bewerking door Sam Goldheart

Bewerking goedgekeurd door Sam Goldheart

Voor
Na
Ongewijzigd
Introduction
If your iMac was configured with a Solid State Drive or Fusion Drive it includes an SSD on the back of the logic board. Use this guide to access and remove the SSD. [ … ] '''Before beginning any work on your iMac:''' Unplug the computer and press and hold the power button for ten seconds to discharge the power supply's capacitors. [ … ] '''Be very careful''' not to touch the capacitor leads or any exposed solder joints on the back of the power supply.
If your iMac was configured with a Solid State Drive or Fusion Drive it includes an SSD on the back of the logic board. Use this guide to access and remove the SSD. [ … ] '''Before beginning any work on your iMac:''' Unplug the computer and press and hold the power button for ten seconds to discharge the power supply's capacitors. [ … ] '''Be very careful''' not to touch the capacitor leads or any exposed solder joints on the back of the power supply.
Difficulty
Moderate
Difficult

Gereedschap

  • iMac Intel 27" EMC 2546 and EMC 2639 Adhesive Strips x1 added.
  • Plastic Cards x1 added.
  • Spudger x1 added.
  • T10 Torx Screwdriver x1 added.
  • T9 Torx Screwdriver x1 added.
  • T25 Torx Screwdriver x1 added.