Ga door naar hoofdinhoud

Wijzigingen in Microsoft Surface Rear Cover Replacement introductie

Bewerking door Michael Ruch

Bewerking goedgekeurd door Michael Ruch

Voor
Na
Ongewijzigd
Introduction
Today you will gain the knowledgeStep by step instruction to takeremove the back cover of aon the Microsoft Surface offtablet. In order to complete this task you will need a SpudgerSoft flat headed prying tool to remove panels, T5 Torx Screwdriver, and the Microsoft Surface device itself. If you do not have these tools, you may purchase them by choosing the links from down below. It is important to wear safety glass when preforming this task to prevent any harm. This process can be preformed by anybody in a clear working areas with appropriate lighting. The process for removing the back cover involves the removal of several small screws and panel covers around the camera.
Conclusion
To reassemble your device, follow these instructions in reverse order. Make sure to not over tighten screw to prevent stripping. Also, make sure that all panel are firmly seated back in there place.