Ga door naar hoofdinhoud

Wijzigingen in Microsoft Surface Rear Cover Replacement introductie

Bewerking door Shawn Bush

Bewerking goedgekeurd door Shawn Bush

Voor
Na
Ongewijzigd
Introduction
Step by step instruction to remove the back cover on the Microsoft Surface tablet. In order to complete this task you will need a Soft flat headed prying tool to remove panels, T5 Torx Screwdriver, and the Microsoft Surface device itself. If you do not have these tools, you may purchase them by choosing the links from down below. It is important to wear safety glassglasses when preformingperforming this task to prevent any harm. This process can be preformedperformed by anybody in a clear working areasarea with appropriate lighting. The process for removing the back cover involves the removal of several small screws and panel covers around the camera.
Conclusion
To reassemble your device, follow these instructions in reverse order. Make sure to not over tighten screwscrews to prevent stripping. Also, make sure that all panelpanels are firmly seated back in theretheir place.

Markeringen

  • Confusing Text removed.
  • Missed a Step removed.