Repareer je spullen Gemeenschap Winkel

Intro-historie: Motorola Moto Z Force Droid Opening Procedure

Bewerken voor Adam O'Camb —

Bewerking goedgekeurd door Adam O'Camb

Voor
Na
Ongewijzigd
Toestel
Motorola Moto Z Force Droid
Type
replacement
Thing
LCD Screen and Digitizer Assembly
Title
Motorola Moto Z Force Droid LCD Screen and Digitizer Assembly Replacement
Introduction
Use this guide to remove or replace a cracked or faulty screen and digitizer assembly on your Motorola Moto Z Force Droid.
'''Before you begin, look at the last step''' and make sure your replacement part matches the one shown. This guide is for replacing a screen/display that is already installed in a new frame. If you bought a bare display instead, you will need to carefully separate your old display from your phone’s existing frame, and then glue the new display in. Those steps are not covered by this guide.
Time Required Min
30 minuten
Time Required Max
1 uur
Imageid
Voor
Na
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Adam O'Camb
Public
Nee

Onderdelen

  • Motorola Moto Z Force Droid LCD Screen and Digitizer x1 added.
  • Moto Z Force Droid Display Adhesive x1 added.

Vlaggen

  • In Progress added.
  • Prerequisite Only added.

Stappen

Stap #: 1
Voor
Na
stepid 215270 stepid 215270