Ga door naar hoofdinhoud

Wijzigingen in Skateboard Bearing Maintenance introductie

Bewerking door Jared Stine

Bewerking goedgekeurd door Jared Stine

Voor
Na
Ongewijzigd
Apparaat
SkateboardSkateboards
SkateboardSkateboards
Title
Skateboard BearingsBearing Maintenance
Skateboard BearingsBearing Maintenance
Introduction
[ … ]If you are thinking of reusing your bearings for a new skateboard setup, it is advised that you used the guide in order to prolong the life of your bearings.
Time Required Min
30 minuten
Time Required Max
45 minuten
Conclusion
To reassembleWhen finished lubricating your device, follow these instructions in reverse order.bearings, be sure to replace the shields you have removed. Before replacing your bearings back into your wheels, see [http://www.ifixit.com/Guide/Wheel+Installation/11243/1|Wheel Installation] guide, wipe off any excess lubricant or chemicals that be on the outside of the bearing.
To reassembleWhen finished lubricating your device, follow these instructions in reverse order.bearings, be sure to replace the shields you have removed. Before replacing your bearings back into your wheels, see [http://www.ifixit.com/Guide/Wheel+Installation/11243/1|Wheel Installation] guide, wipe off any excess lubricant or chemicals that be on the outside of the bearing.
Summary
ThisBy the end of this guide you will lay out the steps involved in maintaining skateboardknow how to properly maintain and take care of your bearings.
ThisBy the end of this guide you will lay out the steps involved in maintaining skateboardknow how to properly maintain and take care of your bearings.

Gereedschap

  • Paper Towels (2-3) x1 added.
  • Soft Cloth x1 added.
  • Toothbrush x1 added.
  • Utility Knife x1 added.

Onderdelen

  • Bearing Lubricant (1 Bottle) x1 added.
  • Mild Solvent (1 Bottle), Metal Sensitive x1 added.