Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen in iPad 6 Wi-Fi Front Panel Assembly Replacement introductie

Bewerking door Arthur Shi

Bewerking goedgekeurd door Arthur Shi

Voor
Na
Ongewijzigd
Apparaat
[ ]iPad 6 Wi-Fi
Type
[ ]replacement
Thing
[ ]Front Panel Assembly
Title
[ ]iPad 6 Wi-Fi Front Panel Assembly Replacement
Introduction
Use this guide to replace the front glass and digitizer assembly on an iPad 6. [ … ] '''Note that since the Touch ID sensor in the home button is paired to the logic board, this guide includes instructions for removing the home button. In order to retain Touch ID functionality, you need to transfer the original home button to the new front panel assembly.'''
Time Required Min
Geen schatting
Time Required Max
Geen schatting
Imageid
Voor
Na
Difficulty
Difficult
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
Public
Nee
Summary
[ ]Follow this guide to replace the front panel assembly for an iPad 6 Wi-Fi.

Handleidingsbenodigdheden

Gereedschap

  • iOpener x1 added.
  • iFixit Opening Picks set of 6 x1 added.
  • Suction Handle x1 added.
  • Tweezers x1 added.
  • Phillips #00 Screwdriver x1 added.
  • Spudger x1 added.
  • iPad Battery Isolation Pick x1 added.
  • Phillips #000 Screwdriver x1 added.

Onderdelen

  • iPad Air, iPad 5, iPad 6 Adhesive Strips x1 added.

Markeringen

  • In Progress added.