Ga door naar hoofdinhoud

Wijzigingen in G&G AEG Shimming Guide Airsoft introductie

Bewerken voor 101 Tech USA

Bewerking goedgekeurd door 101 Tech USA

Verwijderd
Toegevoegd
Ongewijzigd
Apparaat
[ ]AEG Gear Box Shimming
Type
[ ]installation
Thing
[ ]Shims to each gear
Title
[ ]Gear box shimming
Introduction
Shimming is basically the the task of placing your gears at such a distance from each other that they will perform at their best. What we airsofters call shims are in many ways more like little washers that go on the axles of each gear. [ … ] The goal is to have the gears so that DO NOT bounce meaning to go up and down, or bind meaning that they are being pressed against each other and creating frictions. [ … ] The teeth of each gear also have to make good contact with each other if the teeth have only a small area of contact then that will put alot of pressure on that small area and cause the teeth to fail over time. [ … ] So you can imagine good shimming is one of the most important thing when it comes to having a long lasting and reliable AEG. [ … ] Plus you can make jaws drop when you go to a chrono station and the guys working there shoot your AEG for the first time because your AEG sounds that good.
Time Required Min
Geen schatting
Time Required Max
Geen schatting
Imageid
Voor
Na
Difficulty
Moderate
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
Public
Nee
Summary
[ ]This guide is made to help you master the difficult and tedious art of gearbox shimming

Markeringen

  • In Progress added.
  • Member-Contributed Guide added.

Stappen

Step #: 1
Voor
Na
Step #: 2
Voor
Na
Step #: 3
Voor
Na
Step #: 4
Voor
Na
Step #: 5
Voor
Na
Step #: 6
Voor
Na
Step #: 7
Voor
Na
Step #: 8
Voor
Na
Step #: 9
Voor
Na
Step #: 10
Voor
Na
Step #: 11
Voor
Na