Inleiding

The step-by-step guide for removing bObi's cover and screen. For help putting bObi back together, refer to: Closing bObi's Cover Post-Repair

Gereedschap

Geen gereedschap nodig.

Onderdelen

Geen onderdelen nodig.

Remove bObi’s front wheel to access one of the screws holding bObi together. Make sure the wheel is turned closer to bObi's front touch sensors. Use your screwdriver for leverage, and the wheel will pop up and out.
  • Remove bObi’s front wheel to access one of the screws holding bObi together.

  • Make sure the wheel is turned closer to bObi's front touch sensors. Use your screwdriver for leverage, and the wheel will pop up and out.

  • Uninstall the larger screw that sits deeper in the wheel compartment.

Voeg opmerking toe

Remove bObi's dustbin. Uninstall the 2 screws close to the bin and 2 smaller screws above her main brushes. Uninstall the 2 screws close to the bin and 2 smaller screws above her main brushes.
  • Remove bObi's dustbin.

  • Uninstall the 2 screws close to the bin and 2 smaller screws above her main brushes.

Voeg opmerking toe

Lift the brush holder. To detach completely, unplug it from bObi. Remove the two screws on the dustbin contact point holder inside bObi. There are 4 screws beneath the main brushes. Uninstall these, and open bObi up to expose her main circuit board.
  • Lift the brush holder. To detach completely, unplug it from bObi.

  • Remove the two screws on the dustbin contact point holder inside bObi.

  • There are 4 screws beneath the main brushes. Uninstall these, and open bObi up to expose her main circuit board.

Voeg opmerking toe

Detach the two circuit plugs connecting bObi's cover to the main board and the cover will be completely removed. Detach the two circuit plugs connecting bObi's cover to the main board and the cover will be completely removed. Detach the two circuit plugs connecting bObi's cover to the main board and the cover will be completely removed.
  • Detach the two circuit plugs connecting bObi's cover to the main board and the cover will be completely removed.

Voeg opmerking toe

Remove the four screws that secure bObi's screen and lift the whole piece out. Put the replacement screen in the open space.
  • Remove the four screws that secure bObi's screen and lift the whole piece out.

  • Put the replacement screen in the open space.

Voeg opmerking toe

Re-install all four screws. For a tutorial on closing bObi, see: Closing bObi's Cover Post-Repair

Voeg opmerking toe

Conclusie

To reassemble your device, follow the guide for closing bObi, found here: Closing bObi's Cover Post-Repair

Chelsea

Lid sinds: 24-09-14

2.278 Reputatie

31 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 74