Repareer je spullen Gemeenschap Winkel

Zoomer Jurassic World Indominus Rex Back Cover Replacement

Inleiding

Remove the back cover of the Zoomer Jurassic World Indominus Rex to get access to the motherboard, battery and the mechanical systems of the toy.

Wat je nodig hebt

  1. Zoomer Jurassic World Indominus Rex Back Cover Replacement, Back Cover: stap 1, afbeelding 1 van 1

    • Turn off and unplug Zoomer Jurassic World Indominus Rex from any power source before doing replacements.

    • Remove all eight (8) 9.3mm Phillips screws using Phillips #1 screwdriver.

    Vertaal

  3. Zoomer Jurassic World Indominus Rex Back Cover Replacement: stap 2, afbeelding 1 van 2 Zoomer Jurassic World Indominus Rex Back Cover Replacement: stap 2, afbeelding 2 van 2

    • Pry apart the back cover of the Jurassic Indominus Rex and the rest of the body using a spudger.

    • Do not take out the back cover immediately as it it still attached to the motherboard by a wire.

    Vertaal

  4. Zoomer Jurassic World Indominus Rex Back Cover Replacement: stap 3, afbeelding 1 van 2 Zoomer Jurassic World Indominus Rex Back Cover Replacement: stap 3, afbeelding 2 van 2

    • Disconnect the orange wire that connects the motherboard and the back cover.

    • Separate the back cover and the rest of the Zoomer Jurassic World Indominus Rex.

    • Gently press the tab on the side of the orange connector if you are having trouble disconnecting the wire.

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 2 andere bijdragers

Anh Le

Lid sinds: 01/20/16

504 Reputatie

3 handleidingen geschreven

Medailles: 12

+9 andere badges

Team

USF Tampa, Team 10-3, Remmell Spring 2016 Lid van USF Tampa, Team 10-3, Remmell Spring 2016

USFT-REMMELL-S16S10G3

4 Leden

14 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 8

Altijd: 388