Ga door naar hoofdinhoud

Zoll Impact Uni-Vent 731 Battery Compartment Replacement

Medische apparatuur
Noch iFixit, noch deze reparatiehandleiding worden onderschreven door of zijn gelieerd aan de fabrikant van de desbetreffende medische apparatuur.

Wat je nodig hebt

  1. Zoll Impact Uni-Vent 731 Battery Compartment Replacement, Battery Compartment Kit: stap 1, afbeelding 1 van 1
    • Remove the battery compartment cover by unscrewing the (4) Phillips 6-32 X 5/16 screws. This is indicated in red with the number 1.

    • Page 25.

  2. Zoll Impact Uni-Vent 731 Battery Compartment Replacement: stap 2, afbeelding 1 van 2 Zoll Impact Uni-Vent 731 Battery Compartment Replacement: stap 2, afbeelding 2 van 2
    • Remove the battery by unscrewing the (4)Phillips 6-32 X 2 ¼ screws and detaching the plug from its locking latch. This is indicated in the second picture in blue with the number 2.

    • Page 25.

  3. Zoll Impact Uni-Vent 731 Battery Compartment Replacement: stap 3, afbeelding 1 van 1
    • Unscrew the (4) 6-32 X 5/16 Phillips screws to remove the damaged battery compartment case.

    • Page 25.

  4. Zoll Impact Uni-Vent 731 Battery Compartment Replacement: stap 4, afbeelding 1 van 1
    • Rotate battery compartment to mate with upper and lower case cutouts and press firmly into place. Secure with (4) Phillips 6-32 X 5/16 screws provided.

    • Page 25.

  5. Zoll Impact Uni-Vent 731 Battery Compartment Replacement: stap 5, afbeelding 1 van 1
    • Re-assemble the battery by connecting its cable to the connector (pull on cable to insure it is locked in place) then tightening the (4) Phillips 6-32 X 2 ¼ screws. This is indicated in blue with the number 5.

    • Page 25.

  6. Zoll Impact Uni-Vent 731 Battery Compartment Replacement: stap 6, afbeelding 1 van 1
    • Re-assemble the battery compartment cover by tightening the (4) 6-32 X5/16 screws. This is indicated in red with the number 6.

    • Page 25.

  7. Zoll Impact Uni-Vent 731 Battery Compartment Replacement: stap 7, afbeelding 1 van 1
    • Perform HiPot Testing then perform Functional Test using the RCS to verify the replacement is working properly.

    • Page 25.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Michaela Fromm

Lid sinds: 05/04/20

150 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team S1-G5, Zimmerman Spring 2020 Lid van Cal Poly, Team S1-G5, Zimmerman Spring 2020

CPSU-ZIMMERMAN-S20S1G5

5 Leden

5 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 5

Altijd: 298