ZTE Jasper LTE Camera Replacement

Inleiding

This replacement guide will assist you in replacing the rear-facing camera, step-by-step. You will use this guide when the camera images have become distorted, blurry, dark, or discolored, and you have already taken other measures (clean off the camera lens and updated any appropriate software) to try and get it working.

Wat je nodig hebt

Stap 1 Battery

ZTE Jasper LTE Camera Replacement, Battery: stap 1, afbeelding 1 van 1

Insert the spudger into the bottom left corner of the phone.
Use the spudger to loosen the back cover.

Bewerken

Stap 2

Insert the black spudger near the bottom left of the battery. There will be an opening to easily to remove the battery.
Continuing to use tool, prop up the battery and remove it.

Bewerken

Stap 3 Camera

ZTE Jasper LTE Camera Replacement, Camera: stap 3, afbeelding 1 van 2

ZTE Jasper LTE Camera Replacement, Camera: stap 3, afbeelding 2 van 2

Remove nine 0.8mm Phillips #00 screws.

Bewerken

Stap 4

Remove the back cover by pulling upwards.
Removing the back cover may take a bit of force.

Bewerken

Stap 5

ZTE Jasper LTE Camera Replacement: stap 5, afbeelding 3 van 3

Disconnect the gold component attached to the camera by pulling upwards using the tweezers.
Remove the camera using the tweezers by gripping tightly around the camera and pulling upwards.
Camera is attached to the motherboard with adhesive. As such, you may need to use light force to remove the camera.