Ga door naar hoofdinhoud

Onderdelen

Geen onderdelen opgegeven.

  1. Using a spudger, remove the back panel of the phone.
    • Using a spudger, remove the back panel of the phone.

  2. Remove the battery and SD card from the phone. Remove the battery and SD card from the phone.
    • Remove the battery and SD card from the phone.

  3. Remove the five 4mm Philips #00 screws, circled in red, holding the the back down.
    • Remove the five 4mm Philips #00 screws, circled in red, holding the the back down.

  4. Android Fix Kits

    A new screen or battery is one kit away.

    Nu winkelen

    Android Fix Kits

    A new screen or battery is one kit away.

    Nu winkelen
  5. Remove the back piece, exposing the motherboard.
    • Remove the back piece, exposing the motherboard.

  6. Flip up the three small tan clips holding the ribbons in place. Flip up the three small tan clips holding the ribbons in place. Flip up the three small tan clips holding the ribbons in place.
    • Flip up the three small tan clips holding the ribbons in place.

  7. Gently slide each of the three ribbons out of the motherboard.
    • Gently slide each of the three ribbons out of the motherboard.

  8. Slide the motherboard off of the ribbons detaching it from the front of the phone.
    • Slide the motherboard off of the ribbons detaching it from the front of the phone.

Conclusie

To reassemble your device, follow these instructions in reverse order.

6 andere personen hebben deze handleiding voltooid.

Lilia Johnson

Lid sinds: 08-10-14

653 Reputatie

2 handleidingen geschreven

Team

USF Tampa, Team 9-5, Leahy Fall 2014 Lid van USF Tampa, Team 9-5, Leahy Fall 2014

USFT-LEAHY-F14S9G5

3 Leden

5 handleidingen geschreven

Één commentaar

Zte blade a506 insert sim card problem

Ali Jaffar - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 3

Afgelopen 30 Dagen: 18

Altijd: 3,503