Inleiding

If you are having issues landing your Yuneece Breeze 4K, it is probably due to a leg being broken or chipped. This guide shows you how to safety remove one of the legs and replace it with a new one. We have also provided a link for you that will show you where new replacement legs can be purchased.

Gereedschap

Geen gereedschap nodig.

Onderdelen

  1. Turn the drone over so the propellers are facing down. Pull the leg up so the leg is pointed up towards the ceiling.
    • Turn the drone over so the propellers are facing down. Pull the leg up so the leg is pointed up towards the ceiling.

  2. Firmly grasp the leg so it is snug between your fingers.
    • Firmly grasp the leg so it is snug between your fingers.

    • As you are grasping the leg, turn the leg counter clockwise about 80-90 degrees and pull up. This should take the leg out of its socket.

    • Pull up so the leg is out of it's socket. Now you can put in the replacement leg.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Wes Knutson

Lid sinds: 04-10-18

457 Reputatie

3 handleidingen geschreven

Team

UW Stout, Team S6-G5, Ogden Fall 2018 Lid van UW Stout, Team S6-G5, Ogden Fall 2018

UWSTOUT-OGDEN-F18S6G5

4 Leden

4 handleidingen geschreven

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 2

Afgelopen 30 Dagen: 20

Altijd: 56