Repareer je spullen Gemeenschap Winkel

Yujin Robot iCLEBO Arte Power Transformer Replacement

Inleiding

This guide will show you how to replace the power transformer for your Yujin Robot iCLEBO Arte.

  1. Yujin Robot iCLEBO Arte Power Transformer Replacement, Power Transformer: stap 1, afbeelding 1 van 1

    • Unplug transformer before performing operations on it!

    • Press on the two black plastic tabs to remove the rear cover for the charging base.

    Bewerken

  2. Yujin Robot iCLEBO Arte Power Transformer Replacement: stap 2, afbeelding 1 van 1

    • Remove the long cable from inside the base and gently pull the connector from the base.

    Bewerken

  4. Yujin Robot iCLEBO Arte Power Transformer Replacement: stap 3, afbeelding 1 van 1

    • Pull out and remove the old cable from inside the charging base.

    • Detach the thicker part of the cord from the black transformer box.

    Bewerken

  5. Yujin Robot iCLEBO Arte Power Transformer Replacement: stap 4, afbeelding 1 van 1

    • Replace the new thick cable with the old cable just removed. Make sure the cable can fit into the wall before discarding the other cable. If you are residing in the US, this is the connector you need to use.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 3 andere bijdragers

Trent Bingel

Lid sinds: 02/28/17

428 Reputatie

4 handleidingen geschreven

Medailles: 7

+4 andere badges

Team

USF Tampa, Team S2-G3, Nance Spring 2017 Lid van USF Tampa, Team S2-G3, Nance Spring 2017

USFT-NANCE-S17S2G3

4 Leden

14 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 3

Altijd: 567