Ga door naar hoofdinhoud

Xbox One S All Digital Edition Wifi Card Replacement

Wat je nodig hebt

  1. Xbox One S All Digital Edition Wifi Card Replacement, Plastic Enclosure: stap 1, afbeelding 1 van 3 Xbox One S All Digital Edition Wifi Card Replacement, Plastic Enclosure: stap 1, afbeelding 2 van 3 Xbox One S All Digital Edition Wifi Card Replacement, Plastic Enclosure: stap 1, afbeelding 3 van 3
    • Position the iFixit Opening Tool's riveted edge in between the top and bottom cover of the plastic enclosure.

    • Apply downward pressure on the iFixit Opening Tool until the security clip unlocks.

    • Repeat on different points of the plastic enclosure until the bottom cover is removed.

  2. Xbox One S All Digital Edition Wifi Card Replacement: stap 2, afbeelding 1 van 2 Xbox One S All Digital Edition Wifi Card Replacement: stap 2, afbeelding 2 van 2
    • Remove the six 50 mm green screws (labeled F1-F6) from the metal chassis using a Torx 10 screwdriver.

    • These screws hold the top cover of the plastic enclosure to the chassis.

  3. Xbox One S All Digital Edition Wifi Card Replacement: stap 3, afbeelding 1 van 2 Xbox One S All Digital Edition Wifi Card Replacement: stap 3, afbeelding 2 van 2
    • Apply pressure to peel off the sides of the casing.

    • Separate the metal chassis from the top cover, lifting the back of the chassis up and away from the top cover.

    • The plastic back panel is meant to stay attached to the metal chassis.

  4. Xbox One S All Digital Edition Wifi Card Replacement: stap 4, afbeelding 1 van 1
    • Flip the metal enclosure so that the fan cover is on top.

  5. Xbox One S All Digital Edition Wifi Card Replacement, Wifi Card: stap 5, afbeelding 1 van 2 Xbox One S All Digital Edition Wifi Card Replacement, Wifi Card: stap 5, afbeelding 2 van 2
    • Remove the three 15 mm screws with the Torx T8 Security Bit Screwdriver.

    • The top of the metal chassis has been removed in the picture, but is not necessary for the replacement.

  6. Xbox One S All Digital Edition Wifi Card Replacement: stap 6, afbeelding 1 van 1
    • Carefully remove the WiFi Card from the metal chassis.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Jules Hajjar

Lid sinds: 10/10/19

1.531 Reputatie

8 handleidingen geschreven

Team

Cal Poly, Team S12-G6, Regan Fall 2019 Lid van Cal Poly, Team S12-G6, Regan Fall 2019

CPSU-REGAN-F19S12G6

4 Leden

26 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 7

Afgelopen 30 dagen: 23

Altijd: 1,643