Ga door naar hoofdinhoud

WowWee MiP Robot Wheel Replacement

Wat je nodig hebt

  1. WowWee MiP Robot Wheel Replacement, Wheel: stap 1, afbeelding 1 van 2 WowWee MiP Robot Wheel Replacement, Wheel: stap 1, afbeelding 2 van 2
    • Use a metal spudger to carefully pry off the hubcap without marring the plastic wheel or hubcap.

    • This plastic material is not replaceable. Any damage will be noticeable.

  2. WowWee MiP Robot Wheel Replacement: stap 2, afbeelding 1 van 2 WowWee MiP Robot Wheel Replacement: stap 2, afbeelding 2 van 2
    • Remove the 12.0 mm Phillips #2 screw.

    • Hold the wheel in place, or it will rotate as you attempt to remove the screw.

  3. WowWee MiP Robot Wheel Replacement: stap 3, afbeelding 1 van 1
    • Pull the wheel off of the square axle.

    • Do not use excessive force while removing the wheel. Pulling too hard on the wheel can damage the axle.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Daniel Burkholder

Lid sinds: 02/16/16

623 Reputatie

4 handleidingen geschreven

Team

USF Tampa, Team 3-4, Wollert Spring 2016 Lid van USF Tampa, Team 3-4, Wollert Spring 2016

USFT-WOLLERT-S16S3G4

4 Leden

10 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 13

Altijd: 839