Repareer je spullen Gemeenschap Winkel

Windsor Willow Chain Replacement

Inleiding

This guide shows how to remove a chain on a Windsor Willow.

  1. Windsor Willow Chain Replacement, Chain: stap 1, afbeelding 1 van 1

    • The chain connects the crank arm to the gear cluster on the back wheel.

    Vertaal

  2. Windsor Willow Chain Replacement: stap 2, afbeelding 1 van 1

    • On the chain, locate the master link. It is a lighter gray than the other links of the chain. This is how you can break the chain for easier removal.

    Vertaal

  4. Windsor Willow Chain Replacement: stap 3, afbeelding 1 van 2 Windsor Willow Chain Replacement: stap 3, afbeelding 2 van 2

    • To separate the Master Link, hold the left side of the link in your left hand and the link to the right in your right hand. Push the two links together to enable the release. Pull the links apart, one hand moving towards yourself and the other away from you. This will separate the links of the chain.

    Vertaal

  5. Windsor Willow Chain Replacement: stap 4, afbeelding 1 van 1

    • Once you have separated the links of the chain, pull down on the right side of the chain as shown. Pull until the chain has been fully removed from the gears. Place the chain on a paper towel or cloth to prevent getting grease anywhere.

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Auteur

met 2 andere bijdragers

Stuart Ross

Lid sinds: 01/24/17

225 Reputatie

2 handleidingen geschreven

Medailles: 7

+4 andere badges

Team

Cal Poly, Team 10-6, Banghart Winter 2017 Lid van Cal Poly, Team 10-6, Banghart Winter 2017

CPSU-BANGHART-W17S10G6

5 Leden

6 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 2

Altijd: 70