Inleiding

This guide will demonstrate how to remove and replace the feet on the Wii Balance Board.

Onderdelen

Geen onderdelen nodig.

Flip device upside-down so the plastic white board is facing the ground.
  • Flip device upside-down so the plastic white board is facing the ground.

  • Locate the four feet in the corners of the Balance Board.

  • Unscrew the three 12.7 mm Philips screws from each foot cover.

Voeg opmerking toe

Remove the grey plastic ring from the actual foot by lifting it up.
  • Remove the grey plastic ring from the actual foot by lifting it up.

Voeg opmerking toe

  • Separate the loose foot from the device by lifting it up.

Voeg opmerking toe

  • Repeat steps two and three on the remaining four feet.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Cory Olson

Lid sinds: 29-09-14

687 Reputatie

4 handleidingen geschreven

Team

Cal Poly, Team 13-8, Forte Fall 2014 Lid van Cal Poly, Team 13-8, Forte Fall 2014

CPSU-FORTE-F14S13G8

5 Leden

5 handleidingen geschreven

Één commentaar

I am in need of a foot cover. Where can I find one??

Marvin Hopper - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 9

Altijd: 815