Ga door naar hoofdinhoud

Wen 2307 Motor Replacement

Wat je nodig hebt

  1. Wen 2307 Motor Replacement, Front Panel: stap 1, afbeelding 1 van 1
    • Unscrew the locking sleeve.

  2. Wen 2307 Motor Replacement: stap 2, afbeelding 1 van 1
    • Remove the hanging clip.

  3. Wen 2307 Motor Replacement: stap 3, afbeelding 1 van 2 Wen 2307 Motor Replacement: stap 3, afbeelding 2 van 2
    • Unscrew the six 8mm PH2 screws.

  4. Wen 2307 Motor Replacement: stap 4, afbeelding 1 van 1
    • While pressing the spindle lock button, unscrew the collet nut and remove it along with the brass collet.

  5. Wen 2307 Motor Replacement: stap 5, afbeelding 1 van 1
    • To remove the front panel, pry the device apart while holding the device with the other hand.

    • The front panel should come out easily.

  6. Wen 2307 Motor Replacement, Speed Adjustment Assembly: stap 6, afbeelding 1 van 1
    • Remove the connected wiring from the circuit board.

  7. Wen 2307 Motor Replacement: stap 7, afbeelding 1 van 1
    • Remove the single 4mm screw retaining the circuit board.

  8. Wen 2307 Motor Replacement: stap 8, afbeelding 1 van 1
    • Gently pry the circuit board from the back piece.

  9. Wen 2307 Motor Replacement, Motor: stap 9, afbeelding 1 van 1
    • Gently pull motor assembly out of the panel.

  10. Wen 2307 Motor Replacement: stap 10, afbeelding 1 van 1
    • Motor separates into two pieces.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Joshua Bowery

Lid sinds: 02/08/16

549 Reputatie

3 handleidingen geschreven

Team

USF Tampa, Team 12-1, Eyestone Spring 2016 Lid van USF Tampa, Team 12-1, Eyestone Spring 2016

USFT-EYESTONE-S16S12G1

4 Leden

6 handleidingen geschreven

Één opmerking

All very well and good, but it’s impossible to buy the motor parts to replace…

Closetslave 1 - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 3

Altijd: 598