Ga door naar hoofdinhoud

Wall Outlet Cover Replacement

Wat je nodig hebt

  1. Wall Outlet Cover Replacement, Wall Outlet Cover: stap 1, afbeelding 1 van 3 Wall Outlet Cover Replacement, Wall Outlet Cover: stap 1, afbeelding 2 van 3 Wall Outlet Cover Replacement, Wall Outlet Cover: stap 1, afbeelding 3 van 3
    • Remove any hazardous pieces from previous cover.

    • Be sure to remove the two flathead screws to remove any debris, rather than trying to pull off the sharp pieces.

  2. Wall Outlet Cover Replacement: stap 2, afbeelding 1 van 3 Wall Outlet Cover Replacement: stap 2, afbeelding 2 van 3 Wall Outlet Cover Replacement: stap 2, afbeelding 3 van 3
    • Insert any cable or cables that may be hanging out inside of the wall hole.

    • Making a loop in the cable might be helpful to push it inside the wall.

  3. Wall Outlet Cover Replacement: stap 3, afbeelding 1 van 1
    • Insert two screws into the holes of the new wall cover.

  4. Wall Outlet Cover Replacement: stap 4, afbeelding 1 van 3 Wall Outlet Cover Replacement: stap 4, afbeelding 2 van 3 Wall Outlet Cover Replacement: stap 4, afbeelding 3 van 3
    • Line up the screws in the plate with the screw holes in the wall.

    • Tighten the screws slightly with your hands to ensure that both screws have found the proper holes.

    • Once the screws have been tightened enough to stay in the holes, they should hold the outlet cover in place.

  5. Wall Outlet Cover Replacement: stap 5, afbeelding 1 van 3 Wall Outlet Cover Replacement: stap 5, afbeelding 2 van 3 Wall Outlet Cover Replacement: stap 5, afbeelding 3 van 3
    • Tighten the two screws with a flathead screwdriver.

  6. Wall Outlet Cover Replacement: stap 6, afbeelding 1 van 3 Wall Outlet Cover Replacement: stap 6, afbeelding 2 van 3 Wall Outlet Cover Replacement: stap 6, afbeelding 3 van 3
    • Double check that the wall cover plate does not have a gap, and it is completely attached to the wall.

    • If any gap is detected, push the plate to the wall and continue to tighten the screws until the gap completely closes.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Leydi Navarrete

Lid sinds: 04/12/21

133 Reputatie

1 Handleiding geschreven

Team

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 4

Afgelopen 7 dagen: 11

Afgelopen 30 dagen: 32

Altijd: 1,042