Wahl Professional Designer Blade Adjustment Lever Replacement

Inleiding

Use this guide to replace the blade adjustment lever on your device.

Unscrew the 12 mm Phillip head screw located on the blade adjustment lever using a Phillip's #1 screwdriver. Remove screw from groove to release lever.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Lid sinds: 09/26/17

718 Reputatie

5 handleidingen geschreven

USFT-BOCZAR-F17S14G5

2 Leden

5 handleidingen geschreven