Repareer je spullen Gemeenschap Winkel

Wacom Cintiq 24HD Stand Replacement

Inleiding

You must first take off the stand in order to proceed with any replacement in the Wacom Cintiq 24HD. This guide will show you how to take off the stand and is a prerequisite for all other steps. You may also remove the stand to mount the device in a different way.

Wat je nodig hebt

  1. Wacom Cintiq 24HD Stand Replacement, Stand: stap 1, afbeelding 1 van 1

    • Unplug any cables from the USB, power, display or DVI-D ports by gripping the cord by the connector and pulling straight out of the port.

    • Unplugging the cables by pulling on the cord or pulling at an angle can damage the cable or connector.

    Bewerken

  3. Wacom Cintiq 24HD Stand Replacement: stap 2, afbeelding 1 van 3 Wacom Cintiq 24HD Stand Replacement: stap 2, afbeelding 2 van 3 Wacom Cintiq 24HD Stand Replacement: stap 2, afbeelding 3 van 3

    • Place the device screen down on a flat surface.

    • Remove eight 10mm Phillips #2 screws (four on each leg of the stand) by turning the screwdriver counterclockwise.

    Bewerken

  4. Wacom Cintiq 24HD Stand Replacement: stap 3, afbeelding 1 van 1

    • Lift the stand up and away from the rest of the device so the legs separate from the mounting plate.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Auteur

met 3 andere bijdragers

Andrew Fleming

Lid sinds: 10/08/18

408 Reputatie

3 handleidingen geschreven

Medailles: 8

+5 andere badges

Team

Cal Poly, Team S15-G3, White Fall 2018 Lid van Cal Poly, Team S15-G3, White Fall 2018

CPSU-WHITE-F18S15G3

4 Leden

18 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 9

Afgelopen 30 dagen: 33

Altijd: 1,995