Repareer je spullen Gemeenschap Winkel

Wacom Bamboo Pen And Touch Disassembly

Inleiding

Wacom CTH-460 Bamboo Pen & Touch is a fairly easy device to disassemble, requiring only a Phillips #000 screwdriver and tweezers or similar tool to pry adhered and clipped elements.

The only fragile elements are flex cables connecting the touch digitizer to the mainboard.

If you plan on replacing the USB cable, please note that the USB cable is soldered to the mainboard.

Wat je nodig hebt

  1. Wacom Bamboo Pen And Touch Disassembly, Wacom Bamboo Pen And Touch Disassembly: stap 1, afbeelding 1 van 2 Wacom Bamboo Pen And Touch Disassembly, Wacom Bamboo Pen And Touch Disassembly: stap 1, afbeelding 2 van 2

    • Place the device facing bottom part up.

    • Make sure the working surface won't scratch the surface of the tablet

    Bewerken

  2. Wacom Bamboo Pen And Touch Disassembly: stap 2, afbeelding 1 van 2 Wacom Bamboo Pen And Touch Disassembly: stap 2, afbeelding 2 van 2
    Gereedschap gebruikt in deze stap:
    Tweezers
    $4.99
    Koop

    • Remove 4 rubber feet using a spudger or a pair of tweezers

    • Unscrew 4 #000 Phillips screws

    Bewerken

  3. Wacom Bamboo Pen And Touch Disassembly: stap 3, afbeelding 1 van 1

    • Use spudger or other prying tool to open the tablet.

    • The clips are located all around the perimeter of the tablet

    • The parts inside are attached to the top part of the device

    Bewerken

  5. Wacom Bamboo Pen And Touch Disassembly: stap 4, afbeelding 1 van 1

    • Remove the cable.

    • Do not pull the cable with force - it is soldered to the mainboard

    Bewerken

  6. Wacom Bamboo Pen And Touch Disassembly: stap 5, afbeelding 1 van 1

    • While the pen holder might seem permamently riveted, it can be removed and cleaned

    • Press firmly around the rivets to re-attach it

    Bewerken

  7. Wacom Bamboo Pen And Touch Disassembly: stap 6, afbeelding 1 van 3 Wacom Bamboo Pen And Touch Disassembly: stap 6, afbeelding 2 van 3 Wacom Bamboo Pen And Touch Disassembly: stap 6, afbeelding 3 van 3

    • Unclip 3 flex cable connectors

    • The clips are fragile.

    • Unlocked connector's latch is in vertical position.

    • Due to fragiility of flex cables, it's better to remove the adhesive strips only from the mainboard and leave the attached adhesvie strips to the flex cable as is.

    Bewerken

  8. Wacom Bamboo Pen And Touch Disassembly: stap 7, afbeelding 1 van 3 Wacom Bamboo Pen And Touch Disassembly: stap 7, afbeelding 2 van 3 Wacom Bamboo Pen And Touch Disassembly: stap 7, afbeelding 3 van 3

    • The mainboard is now loose and can be removed.

    • The mainboard contains a fuse, visible in the second image in the gallery.

    • Replacement of touch digitizer requires removing the top sticker.This procedure is not a part of this guide, and it might permamently destroy the working surface of the tablet.

    • USB Cable is soldered to the mainboard

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 2 andere bijdragers

00004707

Lid sinds: 07/23/20

1.055 Reputatie

5 handleidingen geschreven

Medailles: 9

+6 andere badges

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 4

Afgelopen 30 dagen: 24

Altijd: 270