Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Inleiding

Instructions to replace winder motor and gear assembly.

  1. Turn the winder off
    • Turn the winder off

    • Unplug the power cord

  2. Pull angled turntable platform toward you by upper seam Pull angled turntable platform toward you by upper seam
    • Pull angled turntable platform toward you by upper seam

  3. Unplug motor connection cable from circuit board
    • Unplug motor connection cable from circuit board

  4. Unscrew two retaining screws from gearbox Remove round watch insert
    • Unscrew two retaining screws from gearbox

    • Remove round watch insert

    • Unscrew single retaining screw from cup

  5. Pull gearbox and motor out from back of the turntable platform
    • Pull gearbox and motor out from back of the turntable platform

    • Follow steps in reverse order to replace motor

Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

easy_source

Lid sinds: 24-02-17

200 Reputatie

1 Handleiding geschreven

Één commentaar

Hi, could you tell me where to get the circuit board from please?

Regards rob.

cappercapper - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 22

Afgelopen 30 dagen: 107

Altijd: 6,697