Ga door naar hoofdinhoud

Inleiding

Faulty batteries can often be the cause of a malfunctioning drum set. This guide is designed to show how to correctly replace the batteries in your drum set in order to restore power and proper function.

Onderdelen

Geen onderdelen opgegeven.

  1. Locate the battery panel that is centered between the three leg supports at the bottom of the drum set.
    • Locate the battery panel that is centered between the three leg supports at the bottom of the drum set.

  2. To remove the battery panel, loosen the 10 mm panel screw using a flathead 4.0 screwdriver.
    • To remove the battery panel, loosen the 10 mm panel screw using a flathead 4.0 screwdriver.

    • You can also use a small coin to loosen the screw.

  3. Using  your fingers, pry open and remove the back battery panel.
    • Using your fingers, pry open and remove the back battery panel.

  4. Use your fingers to remove each battery from its housing.
    • Use your fingers to remove each battery from its housing.

    • When inserting the new batteries, remember to match them according to the image displayed on the battery panel.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Aaron Klementowski

Lid sinds: 09-02-16

763 Reputatie

6 handleidingen geschreven

Team

USF Tampa, Team 2-8, Cagle Spring 2016 Lid van USF Tampa, Team 2-8, Cagle Spring 2016

USFT-CAGLE-S16S2G8

2 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 8

Altijd: 210