Repareer je spullen Gemeenschap Winkel

VTech Kidizoom Smartwatch DX2 Wristband Replacement

Inleiding

If your wristband has visible damage, is worn, torn or broken the following guide will help you repair your problem.

Wat je nodig hebt

  1. VTech Kidizoom Smartwatch DX2 Wristband Replacement, Wristband: stap 1, afbeelding 1 van 1

    • Begin by placing the watch on its side.

    Vertaal

  2. VTech Kidizoom Smartwatch DX2 Wristband Replacement: stap 2, afbeelding 1 van 1

    • Next, use the flat end of the spudger to wedge between the small-headed pin (located on the band closest to the watch) to pull the pin up through the other side.

    Vertaal

  4. VTech Kidizoom Smartwatch DX2 Wristband Replacement: stap 3, afbeelding 1 van 1

    • Pull the pin out, however not fully, feeling slight resistance is normal.

    Vertaal

  5. VTech Kidizoom Smartwatch DX2 Wristband Replacement: stap 4, afbeelding 1 van 1

    • Finally, pull the wristband off. Repeat on the opposite side of the watch if necessary.

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 2 andere bijdragers

Sydney

Lid sinds: 10/25/18

323 Reputatie

2 handleidingen geschreven

Medailles: 6

+3 andere badges

Team

UMass Dartmouth, Team S3-G5, Peak Fall 2018 Lid van UMass Dartmouth, Team S3-G5, Peak Fall 2018

UMASSD-PEAK-F18S3G5

4 Leden

7 handleidingen geschreven

Één opmerking

My Vtech DX2 had a split pin. One side of the pin was the long side and the other very very short. So look out for that. Thanks for this tutorial, was very helpful.

Ryan Laurel - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 10

Afgelopen 30 dagen: 29

Altijd: 7,216