Repareer je spullen Gemeenschap Winkel

Unsticking SteelSeries Nimbus Triggers

Wat je nodig hebt

  1. Unsticking SteelSeries Nimbus Triggers, Unsticking SteelSeries Nimbus Triggers: stap 1, afbeelding 1 van 1

    • When your triggers get stickier than the Cheeto® dust on your hands it might be time for an intervention.

    Vertaal

  2. Unsticking SteelSeries Nimbus Triggers: stap 2, afbeelding 1 van 2 Unsticking SteelSeries Nimbus Triggers: stap 2, afbeelding 2 van 2

    • Start off by removing the four TR9 Torx Security screws on the back of the controller.

    Vertaal

  3. Unsticking SteelSeries Nimbus Triggers: stap 3, afbeelding 1 van 3 Unsticking SteelSeries Nimbus Triggers: stap 3, afbeelding 2 van 3 Unsticking SteelSeries Nimbus Triggers: stap 3, afbeelding 3 van 3

    • The two screws on the top are further inset than the others. You can use the iFixit 1/4" to 4 mm Driver Adapter as an extender.

    Vertaal

  5. Unsticking SteelSeries Nimbus Triggers: stap 4, afbeelding 1 van 2 Unsticking SteelSeries Nimbus Triggers: stap 4, afbeelding 2 van 2

    • The case is now open, but it's still held together by two clips on the top.

    Vertaal

  6. Unsticking SteelSeries Nimbus Triggers: stap 5, afbeelding 1 van 3 Unsticking SteelSeries Nimbus Triggers: stap 5, afbeelding 2 van 3 Unsticking SteelSeries Nimbus Triggers: stap 5, afbeelding 3 van 3

    • Apply a gentle twisting motion to separate the first clip.

    • Twist in the other direction to separate the second clip.

    • The top is now free!

    Vertaal

  7. Unsticking SteelSeries Nimbus Triggers: stap 6, afbeelding 1 van 3 Unsticking SteelSeries Nimbus Triggers: stap 6, afbeelding 2 van 3 Unsticking SteelSeries Nimbus Triggers: stap 6, afbeelding 3 van 3

    • Be mindful of the three cables still connecting the two halves.

    Vertaal

  8. Unsticking SteelSeries Nimbus Triggers: stap 7, afbeelding 1 van 2 Unsticking SteelSeries Nimbus Triggers: stap 7, afbeelding 2 van 2

    • Here's our problem, the rubber pad has fallen off of the plastic stop leaving only the glue behind.

    • The rubber pad should still be in the controller somewhere (happy hunting) or if you're not in the mood for hide and seek any kind of foam will work as a replacement.

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

8 andere personen hebben deze handleiding voltooid.

Auteur

met 3 andere bijdragers

Jonathan

Lid sinds: 03/13/13

464 Reputatie

2 handleidingen geschreven

Medailles: 8

+5 andere badges

4 opmerkingen

Great, concise fix instructions!

Brian Pippen - Antwoord

My nimbus started to have sticky triggers. I could not believe that I had found this solution! Awesome!

Max-Heinrich Laves - Antwoord

Hi, I have a Nimbus + controller. It's seems to have clips at the back too. Any advice on how to open it?

Sean Hudson - Antwoord

Greetings, someone who can help me where I can get the joystick, original remote control ?

Excellent information

bryan Andino - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 12

Afgelopen 30 dagen: 34

Altijd: 6,114