Inleiding

This guide outlines how to properly remove the air filter on a Troy-Bilt TB675 EC. The guide also explains how to clean the air filter.

Gereedschap

Onderdelen

Geen onderdelen nodig.

Remove the air filter housing by turning the plastic screw counterclockwise with your hand.
  • Remove the air filter housing by turning the plastic screw counterclockwise with your hand.

Voeg opmerking toe

Remove the air filter that lays beneath the housing you removed in step 1.
  • Remove the air filter that lays beneath the housing you removed in step 1.

  • It is good practice to inspect your air filter for tears or other defects. If defects are found it is best to replace the air filter rather than to clean it.

Voeg opmerking toe

  • Clean the air filter thoroughly by spraying compressed air through the filter.

  • Be sure to spray the compressed air away from you in order to prevent injury.

Voeg opmerking toe

  • Wipe all oil and water residue around the air filter casing with a paper towel or rag.

Voeg opmerking toe

  • Place the air filter and air filter casing back in its original position.

  • Be sure the air filter and housing are lined up correctly.

Voeg opmerking toe

  • Complete the maintenance by turning the screw clockwise with your hand until it is fully secured.

Voeg opmerking toe

Eindstreep

Brian Hall

Lid sinds: 10-10-14

110 Reputatie

1 Handleiding geschreven

Team

USF Tampa, Team 1-10, Donnelly Fall 2014 Lid van USF Tampa, Team 1-10, Donnelly Fall 2014

USFT-DONNELLY-F14S1G10

1 Lid

1 handleiding geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 2

Afgelopen 7 Dagen: 6

Afgelopen 30 Dagen: 34

Altijd: 1,087