Inleiding

Warning:

You can disassemble the instrument cluster for a neater solution, however beware, the buzzer is linked to the ECU so any electrical circuit modifications like actually disconnecting the buzzer could lead to a ECU malfunction.

Onderdelen

Geen onderdelen nodig.

  1. Start by removing the hood over the instrument cluster. Pull the hood straight out towards the steering wheel.
    • Start by removing the hood over the instrument cluster. Pull the hood straight out towards the steering wheel.

    Voeg opmerking toe

  2. Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
  3. After removing the hood, undo the four screws securing the instrument cluster and pull forward.
    • After removing the hood, undo the four screws securing the instrument cluster and pull forward.

    Voeg opmerking toe

    • The buzzer is accessed through a grill in the bottom of the instrument cluster/combination meter. Simply poke a sharp object into the grill and mash up the speaker dome to neutralize the buzzer!

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

6 andere personen hebben deze handleiding voltooid.

bt1993

Lid sinds: 13-02-13

345 Reputatie

1 Handleiding geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 15

Afgelopen 30 Dagen: 47

Altijd: 4,730