Inleiding

This guide will show you how to replace your keyboard.

Onderdelen

Geen onderdelen nodig.

  1. Carefully pry the panel above the keyboard from both sides of the laptop using the iFixit opening tool.
    • Carefully pry the panel above the keyboard from both sides of the laptop using the iFixit opening tool.

    • Push back the screen until it is horizontal with the laptop.

    • Gently remove the clips that connect the panel to the screen.

    Voeg opmerking toe

  2. Remove the two #1 Phillips screws using the Phillips #1 screw driver.
    • Remove the two #1 Phillips screws using the Phillips #1 screw driver.

    • Gently pry the keyboard from the laptop using the iFixit opening tool.

    • Slowly lift the keyboard away from the laptop until you are able to remove the ribbon that connects to the laptop.

    • Ensure you remove the keyboard slowly to avoid damaging the ribbon cable.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

5 andere personen hebben deze handleiding voltooid.

Aryn Pauly

Lid sinds: 29-04-10

1 Reputatie

2 handleidingen geschreven

Team

Cal Poly, Team 10-42, Garner Spring 2010 Lid van Cal Poly, Team 10-42, Garner Spring 2010

CPSU-GARNER-S10S10G42

5 Leden

10 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 7

Altijd: 8,105