Inleiding

Learn to replace your hard drive.

Onderdelen

Geen onderdelen nodig.

Remove the hard drive screw labeled with a #1 Phillips head screwdriver  as indicated in the picture, then use a flat edge tool to pry the cover off. Use the plastic flap to pull the hard drive out of its slot. Use the plastic flap to pull the hard drive out of its slot.
  • Remove the hard drive screw labeled with a #1 Phillips head screwdriver as indicated in the picture, then use a flat edge tool to pry the cover off.

  • Use the plastic flap to pull the hard drive out of its slot.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Sophie Schneider

Lid sinds: 15-04-10

82 reputatie

3 handleidingen geschreven

Team

Cal Poly, Team 10-42, Garner Spring 2010 Lid van Cal Poly, Team 10-42, Garner Spring 2010

CPSU-GARNER-S10S10G42

5 Leden

10 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 2

Afgelopen 30 Dagen: 19

Altijd: 9,832