Onderdelen

Geen onderdelen nodig.

  1. Locate the battery locks on the bottom of the laptop. Slide the right lock outwards, until it locks into place. Slide and hold the left lock outwards and hold it in place.
    • Locate the battery locks on the bottom of the laptop.

    • Slide the right lock outwards, until it locks into place.

    • Slide and hold the left lock outwards and hold it in place.

  2. While holding the lock in place, slide the battery out towards you.
    • While holding the lock in place, slide the battery out towards you.

  3. Using a #1 Phillips screwdriver, remove the 5.8 mm screw in the battery slot.
    • Using a #1 Phillips screwdriver, remove the 5.8 mm screw in the battery slot.

  4. Use a plastic opening tool to pry off the plastic panel above the keyboard.
    • Use a plastic opening tool to pry off the plastic panel above the keyboard.

  5. Gratis verzending van alle bestellingen van meer dan US$ 100 of met een Pro Tech Toolkit!

    Doorblader onze winkel
  6. Unscrew the four 3.7 mm screws at the top of the keyboard using a #1 Phillips screwdriver. Unscrew the four 3.7 mm screws at the top of the keyboard using a #1 Phillips screwdriver.
    • Unscrew the four 3.7 mm screws at the top of the keyboard using a #1 Phillips screwdriver.

  7. Slowly lift the keyboard out, up and towards the screen.
    • Slowly lift the keyboard out, up and towards the screen.

    • Do not try to remove the keyboard completely because it is still attached to the motherboard.

  8. Using a plastic opening tool, flip the ZIF connector up to release the ribbon and the keyboard.
    • Using a plastic opening tool, flip the ZIF connector up to release the ribbon and the keyboard.

  9. Remove stickers from four corners of laptop. Remove screws underneath stickers.
    • Remove stickers from four corners of laptop.

    • Remove screws underneath stickers.

  10. Use plastic opening tool to pry the hinges off. Remove the screen cover.
    • Use plastic opening tool to pry the hinges off.

    • Remove the screen cover.

    • Unscrew the six screws on the bottom of the screen near the top of the hinges.

  11. Remove cable located next to the fan. Fold down screen without screen back cover to remove cable as shown.
    • Remove cable located next to the fan.

    • Fold down screen without screen back cover to remove cable as shown.

  12. Unscrew both screws on each side of the screen. Remove the screen.
    • Unscrew both screws on each side of the screen.

    • Remove the screen.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Christopher Camara

Lid sinds: 11-03-14

170 Reputatie

1 Handleiding geschreven

Team

UMass Dartmouth, Team 4-4, Calaway Spring 2014 Lid van UMass Dartmouth, Team 4-4, Calaway Spring 2014

UMASSD-CALAWAY-S14S4G4

4 Leden

2 handleidingen geschreven

Één commentaar

Que éxito esta pagina , muy gran trabajo, soy de Perú y creo que este tipo de trabajos son muy bien valorados, saludos a la distancia.

Korregan - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 11

Altijd: 1,787