Inleiding

Installing additional RAM modules will increase the performance of your laptop, and is relatively easy to do.

  1. Close the laptop lid and flip the laptop over.
    • Close the laptop lid and flip the laptop over.

    • Switch the lock button on the left to the unlock position. (The unlock position is to the left side.)

    Voeg opmerking toe

  2. Push the release button to the right.
    • Push the release button to the right.

    • Hold the release button to the right and lift the battery out of its housing.

    Voeg opmerking toe

  3. Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    • Locate the RAM Module compartment on the bottom side of the laptop.

    • Carefully remove the 4.6mm 0 Phillips head screw and put it in a safe place.

    • Locate the notch on the screw side of the lid and lift to remove it.

    Voeg opmerking toe

    • Push the metal tabs on the sides of the RAM outward and the RAM will pop up.

    • Gently pull the RAM out.

    • Replace the RAM by sliding the new one into the angled socket similarly to how you removed the old RAM.

    • Gently apply pressure until the metal tabs on the sides click into place.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Elliot Fiske

Lid sinds: 30-01-13

36 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team 20-5, Maness Winter 2013 Lid van Cal Poly, Team 20-5, Maness Winter 2013

CPSU-MANESS-W13S20G5

4 Leden

5 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 10

Afgelopen 30 Dagen: 59

Altijd: 5,940