Onderdelen

Geen onderdelen nodig.

Remove the 5.75 mm screw from the cover panel. Turn the laptop over with the screen facing down.
  • Remove the 5.75 mm screw from the cover panel.

  • Turn the laptop over with the screen facing down.

Voeg opmerking toe

Lift up the cover panel using a plastic opening tool.
  • Lift up the cover panel using a plastic opening tool.

Voeg opmerking toe

Remove the 5.64 mm screw from the bottom of the crossing bar. Remove the crossing bar.
  • Remove the 5.64 mm screw from the bottom of the crossing bar.

  • Remove the crossing bar.

Voeg opmerking toe

Use a plastic opening tool to disconnect the black and white antenna cable's connectors from the Wi-Fi card. Note that the black wire is connected to the port that is labeled main.
  • Use a plastic opening tool to disconnect the black and white antenna cable's connectors from the Wi-Fi card.

    • Note that the black wire is connected to the port that is labeled main.

Voeg opmerking toe

Use fingers to push the clips away from memory card. Use fingers to push the clips away from memory card.
  • Use fingers to push the clips away from memory card.

Voeg opmerking toe

Use fingers to remove the Wi-Fi card.
  • Use fingers to remove the Wi-Fi card.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Garrett Gudgel

Lid sinds: 05-10-10

714 Reputatie

13 handleidingen geschreven

Team

Cal Poly, Team 4-43, Amido Fall 2010 Lid van Cal Poly, Team 4-43, Amido Fall 2010

CPSU-AMIDO-F10S4G43

5 Leden

13 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 2

Afgelopen 30 Dagen: 4

Altijd: 3,037