Onderdelen

Geen onderdelen nodig.

Use the plastic opening tool to lift up the top panel all the way along the keyboard until it loosens.
  • Use the plastic opening tool to lift up the top panel all the way along the keyboard until it loosens.

  • It may be helpful to first pry at the rear of the hinge covers (not shown) to release them. Then Insert the plastic opening tool underneath the top panel's sides and then front edge.

Voeg opmerking toe

Remove the top panel by popping the panel out the top left socket, then do the same with the right side.
  • Remove the top panel by popping the panel out the top left socket, then do the same with the right side.

Voeg opmerking toe

  • Remove the two 3.67 mm screws from the top corners of the keyboard.

Voeg opmerking toe

  • Use fingers to lift up the keyboard from the top.

  • Do not try to remove the keyboard completely because it is still attached to the motherboard.

Voeg opmerking toe

  • Remove the cable connecting the keyboard with the motherboard.

  • Be aware of the locking tabs on each side of the ribbon-cable connector—they slide back about 2mm to free the cable.

  • Lift up and remove the keyboard.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Garrett Gudgel

Lid sinds: 05-10-10

714 Reputatie

13 handleidingen geschreven

Team

Cal Poly, Team 4-43, Amido Fall 2010 Lid van Cal Poly, Team 4-43, Amido Fall 2010

CPSU-AMIDO-F10S4G43

5 Leden

13 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 3

Altijd: 3,963