Inleiding

This guide provides step by step instructions on how to replace the internal fan.

Onderdelen

Geen onderdelen nodig.

Flip the laptop over so the bottom is facing up.
  • Flip the laptop over so the bottom is facing up.

  • Slide each of the three tabs on the bottom half of the assembly into the unlocked position.

Voeg opmerking toe

Gently lift the battery out of the computer.
  • Gently lift the battery out of the computer.

Voeg opmerking toe

  • Remove the single 3mm Phillips #00 screw that secures the wireless card cover.

Voeg opmerking toe

  • Remove the WIFI module cover. It will pull right off.

Voeg opmerking toe

  • Unplug the white and black wires from the WiFi module.

Voeg opmerking toe

  • Remove the twelve 8mm button head Phillips #00 B8 screws.

  • Remove the two 14 mm button head Phillips #00 B14 screws.

  • Remove the two 10 mm Phillips #00 battery compartment screws.

  • Remove the two 8 mm Phillips #00 screws.

Voeg opmerking toe

  • Remove the seven 4mm flat Phillips #00 screws.

  • Remove the seven 20mm button head Phillips #00 screws.

Voeg opmerking toe

  • Use the plastic opening tool to pry the two halves apart.

Voeg opmerking toe

  • Remove the three 2 mm Phillips #00 screws that secure the fan to the motherboard.

Voeg opmerking toe

  • Remove the small plug connecting the fan power cable to the motherboard.

  • Carefully lift the fan out of the computer.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Cole Uhland

Lid sinds: 30-09-13

216 Reputatie

2 handleidingen geschreven

Team

Cal Poly, Team 14-8, Forte Fall 2013 Lid van Cal Poly, Team 14-8, Forte Fall 2013

CPSU-FORTE-F13S14G8

4 Leden

5 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 2

Altijd: 642