Inleiding

This guide removes the keyboard from the laptop. Removing the keyboard allows for replacement of the keyboard as well as access to the internal components of the laptop.

Onderdelen

Geen onderdelen nodig.

  1. Locate the two sliding locks indicated in the photo.
    • Locate the two sliding locks indicated in the photo.

    • Slide the right lock (labeled "1") to the right. It will remain in the unlocked position.

    • Slide the left lock (labeled "2") to the left and hold it in place.

    Voeg opmerking toe

  2. While holding the left lock, place your finger in the indentation next to the battery and lift the battery out.
    • While holding the left lock, place your finger in the indentation next to the battery and lift the battery out.

    Voeg opmerking toe

    • Remove the four screws indicated in the photos using a Phillips 00 Screwdriver. Left to right: 6mm button-head, 3mm flat-head, 6mm button-head, 6mm button-head.

    Voeg opmerking toe

  3. Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    • With your hands, grasp the speaker cover on the edge nearest to the screen.

    • Pry the speaker cover upward.

    Voeg opmerking toe

    • Remove the speaker cover. Your laptop will look like this photo when the speaker cover has been removed.

    Voeg opmerking toe

    • Remove the two 4mm flat-head screws indicated in the photo.

    Voeg opmerking toe

    • Slightly lift and ease the keyboard forward, toward the screen, until the tabs clear the case.

    • When all the tabs are free, slowly lift the bottom of the keyboard while keeping the top of the keyboard angled down. Continue to carefully rotate the keyboard over until you can access the ribbon cable that is still connecting it to the computer.

    Voeg opmerking toe

    • The Ribbon Cable must be disconnected here to release the keyboard.

    • Using a plastic splunger or the tip of your screwdriver gently push upward on the two black tabs securing the connection.

    • When the black plastic bar running across the cable is unseated you can slowly and carefully pull the ribbon cable free.

    • You can now lift and remove the keyboard.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Daniel Johnson

Lid sinds: 07-04-13

102 Reputatie

4 handleidingen geschreven

Team

Cal Poly, Team 17-6, Regan Spring 2013 Lid van Cal Poly, Team 17-6, Regan Spring 2013

CPSU-REGAN-S13S17G6

5 Leden

11 handleidingen geschreven

When I got to step 8 in removing the keyboard, the green ribbon cable is connected to a white pin connector. The while pin connector came off. How can I reconnect it?

Thanks

Dave

dave@mediabistro.com

dave argie - Antwoord

Is it the actual cable connection or the push tab that holds the flex cable in place?

South30 -

Hi Judson

It is the actual connection that appears as white in the picture. It came off.

Thx

Dave

dave arganbright - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 8

Altijd: 1,630