Onderdelen

Geen onderdelen nodig.

  1. Peel back the sticker on the bottom of the device to reveal the two screws
    • Peel back the sticker on the bottom of the device to reveal the two screws

  2. Unscrew the two t-5 screws
    • Unscrew the two t-5 screws

  3. Shove the flat head screw driver into the edge of the device.  Pry the faceplate
    • Shove the flat head screw driver into the edge of the device. Pry the faceplate

  4. Release the ribbon cable
    • Release the ribbon cable

  5. Gratis verzending van alle bestellingen van meer dan US$ 100,00 of met een Pro Tech Toolkit!

    Doorblader onze winkel
  6. Identify the green motherboard.
    • Identify the green motherboard.

    • Unscrew the threes screws holding the board in place.

  7. Remove the board and battery from the back plate
    • Remove the board and battery from the back plate

  8. Attach the board and battery to the new back plate
    • Attach the board and battery to the new back plate

  9. Put the green motherboard back into the back plate and secure with the 3 screws
    • Put the green motherboard back into the back plate and secure with the 3 screws

  10. Snap it back together!
    • Snap it back together!

  11. insert t-5 screws and tighten
    • insert t-5 screws and tighten

  12. Replace the label to hide screws
    • Replace the label to hide screws

Conclusie

To reassemble your device, follow these instructions in reverse order.

Mike Sollars

Lid sinds: 11-07-13

471 Reputatie

3 handleidingen geschreven

Team

WRI115, Team 1-1, Ruszkiewicz Spring 2013 Lid van WRI115, Team 1-1, Ruszkiewicz Spring 2013

WRI115-RUSZKIEWICZ-S13S1G1

4 Leden

3 handleidingen geschreven

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 4

Altijd: 960