Ga door naar hoofdinhoud

TomTom XXL 540 Battery Replacement

Wat je nodig hebt

  1. TomTom XXL 540 Battery Replacement, Battery: stap 1, afbeelding 1 van 1
    • Peel back the sticker on the bottom of the device to reveal the two screws.

  2. TomTom XXL 540 Battery Replacement: stap 2, afbeelding 1 van 1
    • Unscrew the two T5 Torx screws.

  3. TomTom XXL 540 Battery Replacement: stap 3, afbeelding 1 van 1
    • Wedge the flat head of the screwdriver into the edge of the device. Gently lift the screen from the cover.

  4. TomTom XXL 540 Battery Replacement: stap 4, afbeelding 1 van 1
    • Release the yellow ribbon cable.

  5. TomTom XXL 540 Battery Replacement: stap 5, afbeelding 1 van 1
    • Identify the green motherboard. Unscrew the three screws holding the board in place.

  6. TomTom XXL 540 Battery Replacement: stap 6, afbeelding 1 van 1
    • Remove the motherboard from the back plate.

  7. TomTom XXL 540 Battery Replacement: stap 7, afbeelding 1 van 1
    • Unplug the battery from the board.

  8. TomTom XXL 540 Battery Replacement: stap 8, afbeelding 1 van 1
    • Plug the new battery into the white receptacle on the green motherboard.

  9. TomTom XXL 540 Battery Replacement: stap 9, afbeelding 1 van 1
    • Transfer the green motherboard back into the back plate and secure it with the 3 screws.

  10. TomTom XXL 540 Battery Replacement: stap 10, afbeelding 1 van 1
    • Reconnect the yellow ribbon cable and connect the screen and back plate back together.

  11. TomTom XXL 540 Battery Replacement: stap 11, afbeelding 1 van 1
    • Insert the t-5 screws and tighten to secure.

  12. TomTom XXL 540 Battery Replacement: stap 12, afbeelding 1 van 1
    • Replace the label to cover the screws.

Conclusie

To reassemble your device, follow these instructions in reverse order.

5 andere personen hebben deze handleiding voltooid.

Mike Sollars

Lid sinds: 07/11/13

519 Reputatie

3 handleidingen geschreven

Team

WRI115, Team 1-1, Ruszkiewicz Spring 2013 Lid van WRI115, Team 1-1, Ruszkiewicz Spring 2013

WRI115-RUSZKIEWICZ-S13S1G1

4 Leden

6 handleidingen geschreven

Één opmerking

Very similar for the 4FL60 and 6000, except in :

Step 1 the screws are visible without removing any stickers

Step 4 hint: to release the ribbon, each end of the white bar has a self-sprung clip to ease away, try not to break them. And for the models above there is a small cable plug to unclip

Step 5 there are 5 screws holding the motherboard

Step 6 it is necessary to unclip plugs for the battery and speaker leads

and vice versa for reassembly

Jim Shaw - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 15

Altijd: 4,585