Onderdelen

Here are the tools you will need:
  • Here are the tools you will need:

    • Standard Screwdriver

    • New Pannier Whole Clip Bracket

    • Wrench

Voeg opmerking toe

To remove clip bracket, first remove all 3 clips using the #2 screwdriver or hand drill (Make sure to put clips and their screws and anchor plates in a safe place as to not misplace any such as a Ziploc bag).
  • To remove clip bracket, first remove all 3 clips using the #2 screwdriver or hand drill (Make sure to put clips and their screws and anchor plates in a safe place as to not misplace any such as a Ziploc bag).

Voeg opmerking toe

  • Unscrew all 13 small black screws. To do so, undo velcro flap located at the top of the laptop sleeve. With the wrench, hold nut in place in the back of the pannier.

Voeg opmerking toe

  • While holding nuts with the wrench, use the screwdriver to unscrew the screw in the front bracket.

Voeg opmerking toe

  • Remove old clip. Take new clip bracket and unscrew and remove middle clip.

Voeg opmerking toe

  • Replace the middle clip and screw it into place on the bag. Place the new clip bracket in place and screw in all 13 screws again.

  • As in step 3 and 4, hold nut with wrench while screwing clip in place. (Be sure to keep washers in between the screws and the body of the bag)

Voeg opmerking toe

  • You're done!

Voeg opmerking toe

Eindstreep

Emilee

Lid sinds: 13-03-14

1.341 Reputatie

9 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 13

Altijd: 935